Gear Gallery……The Indomitable Ebisu
Long overdue, here is the official introduction to the companion to my Guerciotti. Heavily influenced by the designed of French cyclotouring machines of the 1940s, 50s and 60s, I commissioned this 59cm bike from Jitensha Studio in Berkeley.
I told Hiroshi, the proprietor, I wanted a versatile bike for light touring and brevets; I wanted the option of carrying 10-20 lbs. upfront on low-riding front racks; and, I wanted the frame based around the 650B wheel size (and 38mm tire width).
The build included both new and vintage parts including a SON front generator hub powering the headlight, integrated front and rear racks (including detachable low-rider pannier racks) and Honjo fenders, Brooks Team Pro TI saddle, Simplex retrofriction downtube shifters, TA cyclotouriste cranks, and Shimano Ultegra derailers. A Berthoud decaleur is used with the front handlebar bag, which was custom ordered from the Guu-Watanabe in Tokyo. I believe I was their first customer from outside Japan (more on that story here).
Now that I’ve been riding the bike for some time there are inevitably small tweaks I would consider: slightly more geometric trail so it handles better unloaded thereby making it more of an all-around bike (this would require a new fork), indexed shifters (to go with the 8-speed Shimano cassette) or a 6-speed freewheel (to go with the current Simplex shifters), and maybe some slight changes to the gear ratios (currently 47×34 front and 13-27 rear). I’m also eagerly awaiting a true 38mm wide tire from Grand Bois as a replacement for the Panaracer Col de la Via which actually measure 2mm less than 38mm.
Click to Embiggen
Beautiful bike. I looked at the front bag story and did a quick calculation on the prices. Yikes! I hope you love it.
Terry
24 Jul 09 at 10:29 pm
Those were the salad days for sure. But the bike and the bag should last decades as has my Guerciotti.
Nathan
24 Jul 09 at 10:43 pm
I am looking at a similar bike and was wondering if you would share cost for the completed bike?
Mark
18 May 10 at 12:49 pm
hi mark/ you’ll need to contact Hiroshi at Jitensha studio for current prices. they’ve probably changed along with the $/Yen exchange rate. in 2006, my frame and fork cost $1,500. the final price depends on what parts you choose to put on it. racks cost extra and can be expensive too ($200-$400). hope that helps.
fridaycyclotouriste
18 May 10 at 6:52 pm